How To Maintain PE Electrostatic Film

- Oct 18, 2017 -

How to maintain PE electrostatic film:
1,  PE electrostatic film should be deposited into the Treasury, to avoid  the sun, rain; prohibited with acid and alkali oil organic solvent  contact, keep clean and dry, away from the discovery device 1m, room  temperature between -15 ℃ ~ 40 ℃. In the case of
2, PE electrostatic film should be placed in volume, do not fold, storage time should be repeated once a quarter time. Anti - static warning floor tape PET protective film
3,  loading and unloading conveyor belt is best to use the crane, and with a  rigging rope with a smooth lifting, to avoid damage with the edge, not  arrogant loading and unloading, causing loose roll sets. In the case of
4, PE electrostatic film type, specifications according to the needs and specific conditions, a reasonable choice. In the case of
5,  not to different varieties, different specifications models, strength,  cloth number of tape connection (with group) together to use. In the case of
6,  the conveyor belt is best to use hot vulcanized adhesive, in order to  improve reliability, to maintain a high effective strength. In the case of
7,  conveyor conveyor roller diameter and conveyor belt with the minimum  diameter should be consistent with the relevant provisions. In the case of
8, do not make the tape snake or creep, to keep the roller, vertical roller flexibility, tension to moderate. In the case of
9, the conveyor is equipped with baffle and installed clean device, should avoid the wear and tear on the tape. In the case of
10,  cleanliness is the basic conditions for good operation of the tape,  foreign matter will affect the belt eccentricity, tension differences,  and even broken. In the case of
11,  the use of tape found early damage phenomenon, it should promptly find  the reasons, repair, to avoid the emergence of adverse consequences.