Medium To High Adhesion Blue Transparent Black and White Color Protection Film For Brushed Hair Line Finish Stainless Steel Plates
Transparent, Blue, Black&White, etc
Maximum 3 colors on the surface
Medium to high, 100-400g/25mm
Water-based Acrylic; Solvent resin acrylic.
Used for Brushed Hair Line Finish Stainless Steel
Used for steel NO.1, NO.2, NO4, NO.6 finish surface
Environmental, durable, recyclable, safe.
Stable adhering capacity.
Easy to paste
Easy to peel without any residue
Acid-resistant, alkali-resistant, moisture-proof, anti-corrosion
Carton package, pallet package, or as required.
Directions For Use:
1. Surfaces to be protected should be dry, free from dust, oil, solvents or other chemicals in case of any residue is caused by the chemical reaction with our film adhesive.
2. Removing the film is advisable to perform in the temperature range 5°C to 40°C (Not below 5°C).
3. Try to eliminate or minimize film elongation, and the formation of air bubbles and folds during lamination.
4. Use laminating machines with rubber coated press rollers.
5. The best results are obtained with temperature of surface and surroundings at +15°C to 40°C.
6. The film is not suitable for extreme thermoforming.
You may also interest in other products, please view our catalogue:
Metal Protective Films
Protective film in Electronics industry
Protective film used in building and house
Printing protective film
Contact: Javier Xie
Mobile: 86-138 2345 9525