Aluminum Foil Protection Film; Protective Tape For Aluminium Foil Sheet
PE Protective Film for Aluminum Foil
Clear, Blue, Black&White, or Customized
1-3 colors, Customized
30-200 microns, Customized
Low to high, 30-800g/25mm, Customized
Water-based or Solvent acrylic resin.
Used for Aluminum Foil surface protection
Stable adhering capacity, special easy-peel-off & remove, no residue after removal.
Carton package, pallet package, or customized
Directions For Use:
1. Aluminum Foil sheet and plate surface to be protected should be dry, free from dust, oil, solvents or other chemicals in case of any residue is caused by the chemical reaction with the film adhesive.
2. Removing film is advisable to perform in the temperature range 5°C to 40°C.
3. Try to eliminate or minimize film elongation, and the formation of air bubbles and folds during lamination.
4. The best results are obtained with temperature of surface and surroundings at +15°C to 40°C.
5. Use laminating machines with rubber coated press rollers.
6. The film is not suitable for extreme thermoforming.
You may also interest in other products, please view our catalogue:
Metal Protective Films
Protective film in Electronics industry
Protective film used in building and house
Printing protective film
Contact: Javier Xie
Mobile: 86-138 2345 9525